The surface to be painted shall be allowed to dry until below 16% moisture content as measured with Protimeter. Ensure the surface is clean and free from all defective or poorly adhering material like old paint film, dirt, grease or wax. Surface that previously affected with algae growth should be treated with fungicidal wash. Surfaced that remain powdery and chalky after thorough preparation, should be sealed with one coat of Solvent Based Sealer adhesion contact primer.

Drying time: Dependent on temperature and humidity

• Touch Dry : 15-20 Minutes
• Recoat: 1-2 Hours
• Theoretical Coverage : 10-14 m² / Litre
• No. of coats : 1 coats

Application: Stir well before use. Application can be carried out by using brush, roller or by spraying.

Thinning: Thinning is usually not necessary. If necessary, thin with 5% of water.

Cleaning Up : Clean all equipment with clean water immediately after use.