The rust, defective or poorly adhere old loose paint film, dirt, grease or wax must be rubbed down using suitable sandpaper to smoothen the unevenness and dust off. New glavanised metal, aluminum, stainless steel or alloy, the surface shall be degreased and prime with a coat of primer.

Application: Brush, roller or spraying.

Thinning: For normal use, thinning is not necessary. Use thinner for dilution.

Cleaning Up : Clean all equipment with Thinner or White Spirit immediately after use.

Drying Time: Dependent on temperature and humidity

• Touch Dry : 3 Hours
• Recoat : 4-6 Hours
• Theoretical Coverage : 10-12 m² / Litre
• No. of coats : 2-3 coats

For wood surfaces, we recommended to prime with a one coat of wood primer.

For metal surfaces, we recommend to prime with a coat of Zinc Chromate Primer or Red Oxide primer. Follow by one coat of undercoat for the build.